Saturday, July 24, 2010

Memo: dmesg and X.org.0.log on the MeeGo + Nexus One

MeeGo kernel was paniced on the N1. then I used android kernel was built by myself.
X.Org doesn't work yet.

dmesg
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.29-droid-debian (dbrowne@TheBria) (gcc version 4.4.0 (GCC) ) #11 PREEMPT Mon Feb 8 01:02:44 EST 2010
[    0.000000] CPU: ARMv7 Processor [510f00f2] revision 2 (ARMv7), cr=10c5387f
[    0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
[    0.000000] Machine: mahimahi
[    0.000000] Ignoring unrecognised tag 0x4d534d71
[    0.000000] Ignoring unrecognised tag 0x4d534d72
[    0.000000] Ignoring unrecognised tag 0x4d534d73
[    0.000000] Ignoring unrecognised tag 0x4d534d74
[    0.000000] Ignoring unrecognised tag 0x4d534d75
[    0.000000] Ignoring unrecognised tag 0x4d534d76
[    0.000000] Ignoring unrecognised tag 0x5441000a
[    0.000000] Ignoring unrecognised tag 0x41387898
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 56064
[    0.000000] free_area_init_node: node 0, pgdat c045fd90, node_mem_map c0510000
[    0.000000]   Normal zone: 438 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 55626 pages, LIFO batch:15
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 55626
[    0.000000] Kernel command line: board_mahimahi.disable_uart3=0 board_mahimahi.usb_h2w_sw=0 board_mahimahi.disable_sdcard=0 diag.enabled=0 board_mahimahi.debug_uart=0 smisize=0  androidboot.baseband=4.06.00.12_7 androidboot.cid=GOOGL001 androidboot.carrier=GOOGLE androidboot.mid=PB9910000 androidboot.keycaps=qwerty androidboot.mode=normal androidboot.serialno=HT015P803993 androidboot.bootloader=0.33.0012 init=/sbin/preinit rootwait root=/dev/mmcblk0p1 rootfstype=ext3 rw console=ttyS2,115200n8 omapfb.vram=0:2M,1:2M,2:2M nosplash
[    0.000000] Unknown boot option `board_mahimahi.disable_uart3=0': ignoring
[    0.000000] Unknown boot option `board_mahimahi.usb_h2w_sw=0': ignoring
[    0.000000] Unknown boot option `androidboot.baseband=4.06.00.12_7': ignoring
[    0.000000] Unknown boot option `androidboot.cid=GOOGL001': ignoring
[    0.000000] Unknown boot option `androidboot.carrier=GOOGLE': ignoring
[    0.000000] Unknown boot option `androidboot.mid=PB9910000': ignoring
[    0.000000] Unknown boot option `androidboot.keycaps=qwerty': ignoring
[    0.000000] Unknown boot option `androidboot.mode=normal': ignoring
[    0.000000] Unknown boot option `androidboot.bootloader=0.33.0012': ignoring
[    0.000000] Unknown boot option `omapfb.vram=0:2M,1:2M,2:2M': ignoring
[    0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[    0.000000] Console: colour dummy device 80x30
[    0.000183] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000488] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.012023] Memory: 219MB = 219MB total
[    0.012054] Memory: 216832KB available (4144K code, 884K data, 108K init)
[    0.012664] Calibrating delay loop... 509.54 BogoMIPS (lpj=2547712)
[    0.239898] Mount-cache hash table entries: 512
[    0.240814] Initializing cgroup subsys debug
[    0.240814] Initializing cgroup subsys cpuacct
[    0.240844] Initializing cgroup subsys freezer
[    0.240875] CPU: Testing write buffer coherency: ok
[    0.243469] net_namespace: 748 bytes
[    0.243988] regulator: core version 0.5
[    0.244323] NET: Registered protocol family 16
[    0.245666] mahimahi_init() revision=129
[    4.153503] mahimahi_init_mmc()+
[    4.153808] mahimahi_init_mmc()-
[    4.163177] bio: create slab at 0
[    4.164550] msm_i2c_probe
[    4.164672] msm_i2c_probe: clk_ctl 35d, 100000 Hz
[    4.166046] regulator: VDCDC1: 1000 <--> 1300 mV
[    4.166259] regulator: VDCDC2: 1260 mV
[    4.166442] regulator: VDCDC3: 800 <--> 3300 mV
[    4.166625] regulator: LDO1: 1000 <--> 3150 mV
[    4.166839] regulator: LDO2: 3300 mV
[    4.168823] Bluetooth: Core ver 2.15
[    4.169036] NET: Registered protocol family 31
[    4.169036] Bluetooth: HCI device and connection manager initialized
[    4.169067] Bluetooth: HCI socket layer initialized
[    4.169525] cfg80211: Using static regulatory domain info
[    4.169525] cfg80211: Regulatory domain: US
[    4.169555]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    4.169555]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[    4.169586]     (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    4.169586]     (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    4.169616]     (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    4.169616]     (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    4.169647]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[    4.169647] cfg80211: Calling CRDA for country: US
[    4.171081] Switched to high resolution mode on CPU 0
[    4.171478] NET: Registered protocol family 2
[    4.171722] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[    4.172302] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    4.172485] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[    4.172546] TCP: Hash tables configured (established 8192 bind 8192)
[    4.172576] TCP reno registered
[    4.172882] NET: Registered protocol family 1
[    4.173858] smd_init()
[    4.173858] smd_core_init()
[    4.173950] smd_core_init() done
[    4.173980] msm_init_last_radio_log: last radio log is 40000 bytes long
[    4.174468] smd_alloc_channel() cid=00 size=08192 'SMD_DS'
[    4.174652] smd_alloc_channel() cid=01 size=08192 'SMD_DIAG'
[    4.174804] smd_alloc_channel() cid=02 size=08192 'SMD_RPCCALL'
[    4.175018] smd_alloc_channel() cid=07 size=32768 'SMD_DATA1'
[    4.175170] smd_alloc_channel() cid=08 size=08192 'SMD_DATA2'
[    4.175323] smd_alloc_channel() cid=09 size=08192 'SMD_DATA3'
[    4.175476] smd_alloc_channel() cid=11 size=32768 'SMD_DATA5'
[    4.175628] smd_alloc_channel() cid=12 size=32768 'SMD_DATA6'
[    4.175781] smd_alloc_channel() cid=13 size=32768 'SMD_DATA7'
[    4.175933] smd_alloc_channel() cid=15 size=08192 'SMD_DATA9'
[    4.176086] smd_alloc_channel() cid=27 size=08192 'SMD_GPSNMEA'
[    4.176269] smd_alloc_channel() cid=40 size=08192 'DSP_DIAG'
[    4.176422] smd_alloc_channel() cid 41 does not exist
[    4.176452] smd_alloc_channel() cid=42 size=08192 'DSP_DAL_AQ_VID'
[    4.176605] smd_alloc_channel() cid=43 size=08192 'DSP_DAL_AQ_AUD'
[    4.176757] smd_alloc_channel() cid=46 size=08192 'DSP_DAL00'
[    4.176910] smd_alloc_channel() cid 47 does not exist
[    4.176940] smd_alloc_channel() cid=48 size=08192 'SMD_DAL_AM_AUD'
[    4.177093] smd_alloc_channel() cid=49 size=08192 'SMD_DAL00'
[    4.177246] smd_alloc_channel() cid=50 size=08192 'SMD_DATA5_CNTL'
[    4.177398] smd_alloc_channel() cid=51 size=08192 'SMD_DATA6_CNTL'
[    4.177612] smd_alloc_channel() cid=52 size=08192 'SMD_DATA7_CNTL'
[    4.178894] SMD: ch 2 1 -> 2
[    4.181884] mdp_probe: initialized
[    4.181945] spi: SPI_CONFIG=8f
[    4.181945] spi: SPI_IO_CONTROL=401
[    4.181945] spi: SPI_OPERATIONAL=85
[    4.181976] spi: SPI_ERROR_FLAGS_EN=7f
[    4.181976] spi: SPI_ERROR_FLAGS=7f
[    4.181976] -mahimahi_init_spi_hack()
[    4.182373] Registered led device: lcd-backlight
[    4.184783] mahimahi-microp 0-0066: microp version [0B][15]
[    4.185211] input: lightsensor-level as /devices/virtual/input/input0
[    4.185577] Registered led device: green
[    4.185791] Registered led device: amber
[    4.185974] Registered led device: red
[    4.186157] Registered led device: blue
[    4.186340] Registered led device: jogball-backlight
[    4.186523] Registered led device: button-backlight
[    4.187042] microp_function_initialize: als_kadc=0x4f, als_gadc=0xc0
[    4.202148] flashlight_init
[    4.202209] flashlight_probe
[    4.202239] flashlight_setup_gpio
[    4.202484] Registered led device: flashlight
[    4.203125] smd_alloc_channel() cid 41 does not exist
[    4.203155] smd_alloc_channel() cid 47 does not exist
[    4.204986] H2W: htc_35mm_jack driver register
[    4.205688] input: h2w headset as /devices/virtual/input/input1
[    4.214935] ashmem: initialized
[    4.216339] yaffs Feb  4 2010 00:08:24 Installing.
[    4.220458] alg: No test for stdrng (krng)
[    4.220550] io scheduler noop registered
[    4.220550] io scheduler anticipatory registered (default)
[    4.221405] +mddi_client_nt35399_init()
[    4.221893] samsung_oled_panel_init: +()
[    4.222167] samsung_oled_panel_init: -()
[    4.222900] msmfb_probe() installing 480 x 800 panel
[    4.223358] mdp_lcdc_probe: initialized
[    4.235992] msm_serial: detected port #0
[    4.236083] msm_serial.0: ttyMSM0 at MMIO 0xa9a00000 (irq = 64) is a MSM
[    4.236511] msm_serial: driver initialized
[    4.236846] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 44) is a MSM HS UART
[    4.237274] msm_serial_hs module loaded
[    4.241516] loop: module loaded
[    4.241607] pmem: 1 init
[    4.242553] pmem_adsp: 1 init
[    4.244384] pmem_camera: 1 init
[    4.245178] Android kernel panic handler initialized (bind=crashdata)
[    4.245208] PPP generic driver version 2.4.2
[    4.245605] PPP Deflate Compression module registered
[    4.245635] PPP BSD Compression module registered
[    4.246490] PPP MPPE Compression module registered
[    4.246520] NET: Registered protocol family 24
[    4.247192] tun: Universal TUN/TAP device driver, 1.6
[    4.247222] tun: (C) 1999-2004 Max Krasnyansky
[    4.247802] rmnet0 (): not using net_device_ops yet
[    4.248443] rmnet1 (): not using net_device_ops yet
[    4.248992] rmnet2 (): not using net_device_ops yet
[    4.249572] Linux video capture interface: v2.00
[    4.249694] msm_v4l2: msm_v4l2_init
[    4.250183] s5k3e2fx_sensor_probe
[    4.844787] allocated dma buffer at ffa01000, dma_addr 2d54e000
[    4.844879] read CFG0 = aa5400c0, CFG1 = 6746a
[    4.844909] CFG0 = e85408c0, CFG1 = 4745e
[    4.844909] CFG0: cw/page=3 ud_sz=516 ecc_sz=10 spare_sz=0 num_addr_cycles=5
[    4.845001] NAND_READ_ID = 5510bcad
[    4.845153] status: e03120
[    4.845153] nandid: 5510bcad maker ad device bc
[    4.845245] CFG0: cw/page=3 ud_sz=512 ecc_sz=10 spare_sz=4
[    4.845306] DEV_CMD1: f00f3000
[    4.845397] <6>NAND_EBI2_ECC_BUF_CFG: 1ff
[    4.845397] flash_id: 5510bcad size 20000000
[    4.845397] Creating 6 MTD partitions on "msm_nand":
[    4.845428] 0x000003ee0000-0x000003fc0000 : "misc"
[    4.847473] 0x000004240000-0x000004740000 : "recovery"
[    4.853546] 0x000004740000-0x0000049c0000 : "boot"
[    4.857025] 0x0000049c0000-0x00000dac0000 : "system"
[    5.009948] 0x00000dac0000-0x0000139c0000 : "cache"
[    5.110870] 0x0000139c0000-0x00001fe00000 : "userdata"
[    5.318939] usb_probe() io=ce06c000, irq=58, dma=ffa02000(2d56e000)
[    5.319641] usb_function_register() 'adb'
[    5.319854] usb_function_register() 'usb_mass_storage'
[    5.320007] usb_function_register() 'diag'
[    5.320007] msm_hsusb: functions bound. starting.
[    5.320007] usb_bind_func() 'usb_mass_storage'
[    5.320678] usb_mass_storage usb_mass_storage: Number of LUNs=1
[    5.320739] usb_bind_func() 'adb'
[    5.320739] adb_bind() cd4ee878, cd4eea38
[    5.321136] adb_bind() allocated 4 tx requests
[    5.321594] usb_bind_func() 'diag'
[    5.322082] SMD: ch 1 1 -> 2
[    5.322174] usb_ether_setup()
[    5.322235] usb0 (): not using net_device_ops yet
[    5.322814] usb_function_register() 'ether'
[    5.323547] hsusb: IDLE -> ONLINE
[    5.323638] hsusb: reset controller
[    5.323913] mahimahi_ts_power: power 1
[    5.361206] msm_hsusb_phy_reset: success
[    5.471710] msm_i2c msm_i2c.0: error, status 43c8
[    5.471740] msm_i2c msm_i2c.0: Error during data xfer (-5)
[    5.511199] ulpi: write 0x0c to 0x31
[    5.511199] ulpi: write 0x31 to 0x32
[    5.511199] ulpi: write 0x1d to 0x0d
[    5.511230] ulpi: write 0x1d to 0x10
[    5.511230] ept #0 out max:64 head:ffa02000 bit:0
[    5.511260] ept #1 out max:512 head:ffa02080 bit:1
[    5.511260] ept #2 out max:512 head:ffa02100 bit:2
[    5.511260] ept #3 out max:512 head:ffa02180 bit:3
[    5.511291] ept #0 in max:64 head:ffa02040 bit:16
[    5.511291] ept #1 in max:512 head:ffa020c0 bit:17
[    5.511322] ept #2 in max:512 head:ffa02140 bit:18
[    5.511322] ept #3 in max:512 head:ffa021c0 bit:19
[    5.511352] usb: notify offline
[    5.511383] diag_configure() 0
[    5.511383] msm_hsusb: enable pullup
[    5.511383] hsusb: ONLINE -> OFFLINE
[    5.511413] ### notify_usb_connected(0) ###
[    5.511444] diag_configure() 0
[    5.511444] msm_hsusb: disable pullup
[    5.551177] msm_hsusb_phy_reset: success
[    5.581848] synaptics_ts_probe: Product Major Version 1
[    5.582489] synaptics_ts_probe: Product Minor Version 3
[    5.583160] synaptics_ts_probe: product property 2
[    5.583831] synaptics_ts_probe: device control 81
[    5.584503] synaptics_ts_probe: interrupt enable 1
[    5.586395] synaptics_ts_probe: 0xe0: 1 1 1 2 1 3 0 0
[    5.587585] synaptics_ts_probe: Sensor properties 701
[    5.590728] synaptics_ts_probe: max_x 4050, max_y 6822
[    5.590728] synaptics_ts_probe: inactive_x -210 -168, inactive_y -127 -341
[    5.590759] synaptics_ts_probe: snap_x 0-0 0-0, snap_y 0-0 0-0
[    5.591094] input: synaptics-rmi-touchscreen as /devices/virtual/input/input2
[    5.591827] synaptics_ts_probe: Start touchscreen synaptics-rmi-touchscreen in interrupt mode
[    5.592651] GPIO Matrix Keypad Driver: Start keypad matrix for mahimahi-keypad... in interrupt mode
[    5.592773] GPIO Input Driver: Start gpio inputs for mahimahi-keypad... in interrupt mode
[    5.593383] input: mahimahi-keypad as /devices/virtual/input/input3
[    5.594024] input: mahimahi-nav as /devices/virtual/input/input4
[    5.594451] capella_cm3602_probe: probe
[    5.594451] capella_cm3602_probe: allocating input device
[    5.594512] capella_cm3602_probe: registering input device
[    5.594818] input: proximity as /devices/virtual/input/input5
[    5.595092] capella_cm3602_probe: registering misc device
[    5.595306] capella_cm3602_setup
[    5.595336] proximity 1
[    5.595886] using input dev h2w headset for key reset
[    5.595916] using input dev mahimahi-keypad for key reset
[    5.595947] using input dev mahimahi-nav for key reset
[    5.597015] using rtc device, msm_rtc, for alarms<6>rs30000048:00010000 rs30000048:00010000: rtc core: registered msm_rtc as rtc0
[    5.597137] AKM8973 compass driver: init
[    5.598602] input: compass as /devices/virtual/input/input6
[    5.599395] a1026_init
[    5.599731] Driver for 1-wire Dallas network protocol.
[    5.601135] msm_i2c msm_i2c.0: error, status 43c8
[    5.601165] msm_i2c msm_i2c.0: Error during data xfer (-5)
[    5.601196] ds2482 0-0018: i2c write c3 87 failed, -5, retries left 5
[    5.601531] msm_i2c msm_i2c.0: error, status 43c8
[    5.601562] msm_i2c msm_i2c.0: Error during data xfer (-5)
[    5.601623] ds2482 0-0018: i2c write c3 87 failed, -5, retries left 4
[    5.601959] msm_i2c msm_i2c.0: error, status 43c8
[    5.601989] msm_i2c msm_i2c.0: Error during data xfer (-5)
[    5.602020] ds2482 0-0018: i2c write c3 87 failed, -5, retries left 3
[    5.602355] msm_i2c msm_i2c.0: error, status 43c8
[    5.602386] msm_i2c msm_i2c.0: Error during data xfer (-5)
[    5.602416] ds2482 0-0018: i2c write c3 87 failed, -5, retries left 2
[    5.602783] msm_i2c msm_i2c.0: error, status 43c8
[    5.602783] msm_i2c msm_i2c.0: Error during data xfer (-5)
[    5.602844] ds2482 0-0018: i2c write c3 87 failed, -5, retries left 1
[    5.603149] msm_i2c msm_i2c.0: error, status 43c8
[    5.603179] msm_i2c msm_i2c.0: Error during data xfer (-5)
[    5.603240] ds2482 0-0018: i2c write c3 87 failed, -5, retries left 0
[    5.604705] device-mapper: uevent: version 1.0.3
[    5.605194] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    5.605285] Bluetooth: Virtual HCI driver ver 1.2
[    5.605499] Bluetooth: HCI UART driver ver 2.2
[    5.605529] Bluetooth: HCI H4 protocol initialized
[    5.605529] Bluetooth: HCILL protocol initialized
[    5.606872] mmc0: Qualcomm MSM SDCC at 0x00000000a0300000 irq 24,0 dma 8
[    5.606872] mmc0: 4 bit data mode enabled
[    5.606903] mmc0: MMC clock 144000 -> 50000000 Hz, PCLK 64000000 Hz
[    5.606903] mmc0: Slot eject status = 1
[    5.606903] mmc0: Power save feature enable = 1
[    5.606933] mmc0: DM non-cached buffer at ffa04000, dma_addr 0x2d59e000
[    5.606933] mmc0: DM cmd busaddr 0x2d59e000, cmdptr busaddr 0x2d59e300
[    5.607879] mmc1: Qualcomm MSM SDCC at 0x00000000a0400000 irq 26,0 dma 8
[    5.607879] mmc1: 4 bit data mode enabled
[    5.607910] mmc1: MMC clock 144000 -> 50000000 Hz, PCLK 64000000 Hz
[    5.607910] mmc1: Slot eject status = 0
[    5.607910] mmc1: Power save feature enable = 1
[    5.607940] mmc1: DM non-cached buffer at ffa05000, dma_addr 0x2d5a0000
[    5.607940] mmc1: DM cmd busaddr 0x2d5a0000, cmdptr busaddr 0x2d5a0300
[    5.609619] logger: created 64K log 'log_main'
[    5.609863] logger: created 256K log 'log_events'
[    5.610076] logger: created 64K log 'log_radio'
[    5.610168] ram_console: got buffer at 3a00000, size 40000
[    5.610290] ram_console: found existing buffer, size 19559, start 19559
[    5.697082] console [ram-1] enabled
[    5.750823] Netfilter messages via NETLINK v0.30.
[    5.751129] nf_conntrack version 0.5.0 (3504 buckets, 14016 max)
[    5.751556] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[    5.751831] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[    5.751983] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[    5.752532] xt_time: kernel timezone is -0000
[    5.752960] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.753387] ClusterIP Version 0.8 loaded successfully
[    5.753662] arp_tables: (C) 2002 David S. Miller
[    5.753875] TCP cubic registered
[    5.754119] Initializing XFRM netlink socket
[    5.754302] NET: Registered protocol family 17
[    5.754577] NET: Registered protocol family 15
[    5.754821] Bridge firewalling registered
[    5.755004] Bluetooth: L2CAP ver 2.13
[    5.755279] Bluetooth: L2CAP socket layer initialized
[    5.755432] Bluetooth: SCO (Voice Link) ver 0.6
[    5.755554] Bluetooth: SCO socket layer initialized
[    5.756561] Bluetooth: RFCOMM socket layer initialized
[    5.756774] Bluetooth: RFCOMM TTY layer initialized
[    5.757049] Bluetooth: RFCOMM ver 1.11
[    5.757202] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.757446] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    5.757781] lib80211: common routines for IEEE802.11 drivers
[    5.758026] lib80211_crypt: registered algorithm 'NULL'
[    5.758178] ThumbEE CPU extension supported.
[    5.758819] clock_late_init() disabled 19 unused clocks
[    5.759216] mahimahi_wifi_init: start
[    5.769042] VFP support v0.3: implementor 51 architecture 0 part 0f variant 0 rev 1
[    5.774993] rs30000048:00010000 rs30000048:00010000: setting system clock to 2010-07-24 15:30:33 UTC (1279985433)
[    5.775451] Waiting for root device /dev/mmcblk0p1...
[    5.816619] mmc1: Command timeout
[    5.822601] mmc1: Command timeout
[    5.828674] mmc1: Command timeout
[    5.834655] mmc1: Command timeout
[    6.100616] mmc1: host does not support reading read-only switch. assuming write-enable.
[    6.100891] mmc1: new high speed SDHC card at address aaaa
[    6.101745] mmcblk0: mmc1:aaaa SU04G 3.69 GiB
[    6.102264]  mmcblk0: p1 p2
[    6.216491] kjournald starting.  Commit interval 5 seconds
[    6.221374] EXT3 FS on mmcblk0p1, internal journal
[    6.221679] EXT3-fs: mounted filesystem with ordered data mode.
[    6.222045] VFS: Mounted root (ext3 filesystem) on device 179:1.
[    6.222412] Freeing init memory: 108K
[    6.227233] Warning: unable to open an initial console.
[    6.229248] Failed to execute /sbin/preinit.  Attempting defaults...
[    6.232116] batt: 100%, 4153 mV, 94 mA (-5 avg), 34.7 C, 1384 mAh
[    6.232513] batt: charging OFF


X.org.0.log
[    44.954]
X.Org X Server 1.8.0
Release Date: 2010-04-02
[    44.954] X Protocol Version 11, Revision 0
[    44.954] Build Operating System: Linux 2.6.27.45-0.1-pae armv5tel
[    44.954] Current Operating System: Linux localhost.localdomain 2.6.29-droid-debian #11 PREEMPT Mon Feb 8 01:02:44 EST 2010 armv7l
[    44.954] Kernel command line: board_mahimahi.disable_uart3=0 board_mahimahi.usb_h2w_sw=0 board_mahimahi.disable_sdcard=0 diag.enabled=0 board_mahimahi.debug_uart=0 smisize=0  androidboot.baseband=4.06.00.12_7 androidboot.cid=GOOGL001 androidboot.carrier=GOOGLE androidboot.mid=PB9910000 androidboot.keycaps=qwerty androidboot.mode=normal androidboot.serialno=HT015P803993 androidboot.bootloader=0.33.0012 init=/sbin/preinit rootwait root=/dev/mmcblk0p1 rootfstype=ext3 rw console=ttyS2,115200n8 omapfb.vram=0:2M,1:2M,2:2M nosplash
[    44.955] Build Date: 02 July 2010  05:59:41PM
[    44.955] Build ID: xorg-x11-server 1.8.0-5.23
[    44.955] Current version of pixman: 0.17.4
[    44.955]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    44.955] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    44.956] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 24 07:36:45 2010
[    44.958] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    44.959] (==) No Layout section.  Using the first Screen section.
[    44.959] (==) No screen section available. Using defaults.
[    44.959] (**) |-->Screen "Default Screen Section" (0)
[    44.959] (**) |   |-->Monitor ""
[    45.010] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    45.011] (**) Option "AllowEmptyInput" "False"
[    45.011] (==) Automatically adding devices
[    45.011] (==) Automatically enabling devices
[    45.011] (==) FontPath set to:
    catalogue:/etc/X11/fontpath.d,
    built-ins
[    45.011] (==) ModulePath set to "/usr/lib/xorg/modules"
[    45.011] (==) |-->Input Device ""
[    45.011] (==) |-->Input Device ""
[    45.011] (==) No Layout section. Using the default mouse configuration.
[    45.011] (==) No Layout section. Using the default keyboard configuration.
[    45.011] (II) Loader magic: 0x193178
[    45.011] (II) Module ABI versions:
[    45.011]     X.Org ANSI C Emulation: 0.4
[    45.012]     X.Org Video Driver: 7.0
[    45.012]     X.Org XInput driver : 9.0
[    45.012]     X.Org Server Extension : 3.0
[    45.012] (II) LoadModule: "extmod"
[    45.014] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    45.015] (II) Module extmod: vendor="X.Org Foundation"
[    45.015]     compiled for 1.8.0, module version = 1.0.0
[    45.015]     Module class: X.Org Server Extension
[    45.015]     ABI class: X.Org Server Extension, version 3.0
[    45.015] (II) Loading extension MIT-SCREEN-SAVER
[    45.015] (II) Loading extension XFree86-VidModeExtension
[    45.015] (II) Loading extension XFree86-DGA
[    45.015] (II) Loading extension DPMS
[    45.015] (II) Loading extension XVideo
[    45.015] (II) Loading extension XVideo-MotionCompensation
[    45.015] (II) Loading extension X-Resource
[    45.016] (II) LoadModule: "dbe"
[    45.016] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    45.017] (II) Module dbe: vendor="X.Org Foundation"
[    45.017]     compiled for 1.8.0, module version = 1.0.0
[    45.017]     Module class: X.Org Server Extension
[    45.017]     ABI class: X.Org Server Extension, version 3.0
[    45.017] (II) Loading extension DOUBLE-BUFFER
[    45.017] (II) LoadModule: "glx"
[    45.018] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    45.019] (II) Module glx: vendor="X.Org Foundation"
[    45.019]     compiled for 1.8.0, module version = 1.0.0
[    45.019]     ABI class: X.Org Server Extension, version 3.0
[    45.040] (==) AIGLX enabled
[    45.040] (II) Loading extension GLX
[    45.040] (II) LoadModule: "dri"
[    45.041] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    45.043] (II) Module dri: vendor="X.Org Foundation"
[    45.043]     compiled for 1.8.0, module version = 1.0.0
[    45.043]     ABI class: X.Org Server Extension, version 3.0
[    45.043] (II) Loading extension XFree86-DRI
[    45.043] (II) LoadModule: "dri2"
[    45.044] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    45.045] (II) Module dri2: vendor="X.Org Foundation"
[    45.045]     compiled for 1.8.0, module version = 1.2.0
[    45.045]     ABI class: X.Org Server Extension, version 3.0
[    45.045] (II) Loading extension DRI2
[    45.045] Primary device is not PCI
[    45.045] (==) Matched fbdev as autoconfigured driver 0
[    45.045] (==) Assigned the driver to the xf86ConfigLayout
[    45.045] (II) LoadModule: "fbdev"
[    45.048] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    45.073] (II) Module fbdev: vendor="X.Org Foundation"
[    45.073]     compiled for 1.8.0, module version = 0.4.0
[    45.073]     ABI class: X.Org Video Driver, version 7.0
[    45.073] (II) LoadModule: "mouse"
[    45.076] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[    45.077] (II) Module mouse: vendor="X.Org Foundation"
[    45.077]     compiled for 1.8.0, module version = 1.5.0
[    45.077]     Module class: X.Org XInput Driver
[    45.077]     ABI class: X.Org XInput driver, version 9.0
[    45.077] (II) LoadModule: "kbd"
[    45.120] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[    45.121] (II) Module kbd: vendor="X.Org Foundation"
[    45.121]     compiled for 1.8.0, module version = 1.4.0
[    45.121]     Module class: X.Org XInput Driver
[    45.121]     ABI class: X.Org XInput driver, version 9.0
[    45.121] (II) FBDEV: driver for framebuffer: fbdev
[    45.121] (++) using VT number 2

[    45.122] (WW) xf86OpenConsole: Could not save ownership of VT
[    45.122] (WW) xf86OpenConsole: chown /dev/tty0 failed: No such file or directory
[    45.125] (WW) Falling back to old probe method for fbdev
[    45.125] (II) Loading sub module "fbdevhw"
[    45.125] (II) LoadModule: "fbdevhw"
[    45.126] (II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
[    45.126] (II) Module fbdevhw: vendor="X.Org Foundation"
[    45.126]     compiled for 1.8.0, module version = 0.0.2
[    45.126]     ABI class: X.Org Video Driver, version 7.0
[    45.127] (II) FBDEV(0): using default device
[    45.127] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    45.127] (II) Running in FRAMEBUFFER Mode
[    45.127] (II) FBDEV(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 16/16
[    45.127] (==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
[    45.127] (==) FBDEV(0): RGB weight 565
[    45.128] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[    45.128] (==) FBDEV(0): Default visual is TrueColor
[    45.128] (II) FBDEV(0): hardware: msmfb (video memory: 4500kB)
[    45.128] (II) FBDEV(0): Output LCD has no monitor section
[    45.129] (II) FBDEV(0): Not using default mode "640x350" (vrefresh out of range)
[    45.129] (II) FBDEV(0): Not using default mode "320x175" (doublescan mode not supported)
[    45.129] (II) FBDEV(0): Not using default mode "640x400" (vrefresh out of range)
[    45.129] (II) FBDEV(0): Not using default mode "320x200" (doublescan mode not supported)
[    45.129] (II) FBDEV(0): Not using default mode "720x400" (vrefresh out of range)
[    45.129] (II) FBDEV(0): Not using default mode "360x200" (doublescan mode not supported)
[    45.129] (II) FBDEV(0): Not using default mode "640x480" (vrefresh out of range)
[    45.129] (II) FBDEV(0): Not using default mode "320x240" (doublescan mode not supported)
[    45.129] (II) FBDEV(0): Not using default mode "640x480" (vrefresh out of range)
[    45.129] (II) FBDEV(0): Not using default mode "320x240" (doublescan mode not supported)
[    45.150] (II) FBDEV(0): Not using default mode "640x480" (vrefresh out of range)
[    45.150] (II) FBDEV(0): Not using default mode "320x240" (doublescan mode not supported)
[    45.150] (II) FBDEV(0): Not using default mode "640x480" (vrefresh out of range)
[    45.151] (II) FBDEV(0): Not using default mode "320x240" (doublescan mode not supported)
[    45.151] (II) FBDEV(0): Not using default mode "800x600" (vrefresh out of range)
[    45.151] (II) FBDEV(0): Not using default mode "400x300" (doublescan mode not supported)
[    45.151] (II) FBDEV(0): Not using default mode "800x600" (vrefresh out of range)
[    45.151] (II) FBDEV(0): Not using default mode "400x300" (doublescan mode not supported)
[    45.151] (II) FBDEV(0): Not using default mode "800x600" (vrefresh out of range)
[    45.151] (II) FBDEV(0): Not using default mode "400x300" (doublescan mode not supported)
[    45.151] (II) FBDEV(0): Not using default mode "800x600" (vrefresh out of range)
[    45.151] (II) FBDEV(0): Not using default mode "400x300" (doublescan mode not supported)
[    45.151] (II) FBDEV(0): Not using default mode "800x600" (vrefresh out of range)
[    45.151] (II) FBDEV(0): Not using default mode "400x300" (doublescan mode not supported)
[    45.151] (II) FBDEV(0): Not using default mode "1024x768i" (interlace mode not supported)
[    45.151] (II) FBDEV(0): Not using default mode "512x384i" (doublescan mode not supported)
[    45.152] (II) FBDEV(0): Not using default mode "1024x768" (width too large for virtual size)
[    45.152] (II) FBDEV(0): Not using default mode "512x384" (doublescan mode not supported)
[    45.152] (II) FBDEV(0): Not using default mode "1024x768" (width too large for virtual size)
[    45.152] (II) FBDEV(0): Not using default mode "512x384" (doublescan mode not supported)
[    45.152] (II) FBDEV(0): Not using default mode "1024x768" (width too large for virtual size)
[    45.152] (II) FBDEV(0): Not using default mode "512x384" (doublescan mode not supported)
[    45.152] (II) FBDEV(0): Not using default mode "1024x768" (width too large for virtual size)
[    45.152] (II) FBDEV(0): Not using default mode "512x384" (doublescan mode not supported)
[    45.152] (II) FBDEV(0): Not using default mode "1152x864" (height too large for virtual size)
[    45.152] (II) FBDEV(0): Not using default mode "576x432" (doublescan mode not supported)
[    45.152] (II) FBDEV(0): Not using default mode "1280x960" (height too large for virtual size)
[    45.152] (II) FBDEV(0): Not using default mode "640x480" (doublescan mode not supported)
[    45.152] (II) FBDEV(0): Not using default mode "1280x960" (height too large for virtual size)
[    45.152] (II) FBDEV(0): Not using default mode "640x480" (doublescan mode not supported)
[    45.153] (II) FBDEV(0): Not using default mode "1280x1024" (height too large for virtual size)
[    45.153] (II) FBDEV(0): Not using default mode "640x512" (doublescan mode not supported)
[    45.153] (II) FBDEV(0): Not using default mode "1280x1024" (height too large for virtual size)
[    45.153] (II) FBDEV(0): Not using default mode "640x512" (doublescan mode not supported)
[    45.153] (II) FBDEV(0): Not using default mode "1280x1024" (height too large for virtual size)
[    45.153] (II) FBDEV(0): Not using default mode "640x512" (doublescan mode not supported)
[    45.153] (II) FBDEV(0): Not using default mode "1600x1200" (height too large for virtual size)
[    45.153] (II) FBDEV(0): Not using default mode "800x600" (doublescan mode not supported)
[    45.153] (II) FBDEV(0): Not using default mode "1600x1200" (height too large for virtual size)
[    45.153] (II) FBDEV(0): Not using default mode "800x600" (doublescan mode not supported)
[    45.153] (II) FBDEV(0): Not using default mode "1600x1200" (height too large for virtual size)
[    45.153] (II) FBDEV(0): Not using default mode "800x600" (doublescan mode not supported)
[    45.153] (II) FBDEV(0): Not using default mode "1600x1200" (height too large for virtual size)
[    45.153] (II) FBDEV(0): Not using default mode "800x600" (doublescan mode not supported)
[    45.154] (II) FBDEV(0): Not using default mode "1600x1200" (height too large for virtual size)
[    45.154] (II) FBDEV(0): Not using default mode "800x600" (doublescan mode not supported)
[    45.154] (II) FBDEV(0): Not using default mode "1792x1344" (height too large for virtual size)
[    45.154] (II) FBDEV(0): Not using default mode "896x672" (doublescan mode not supported)
[    45.154] (II) FBDEV(0): Not using default mode "1792x1344" (height too large for virtual size)
[    45.154] (II) FBDEV(0): Not using default mode "896x672" (doublescan mode not supported)
[    45.154] (II) FBDEV(0): Not using default mode "1856x1392" (height too large for virtual size)
[    45.154] (II) FBDEV(0): Not using default mode "928x696" (doublescan mode not supported)
[    45.154] (II) FBDEV(0): Not using default mode "1856x1392" (height too large for virtual size)
[    45.154] (II) FBDEV(0): Not using default mode "928x696" (doublescan mode not supported)
[    45.154] (II) FBDEV(0): Not using default mode "1920x1440" (height too large for virtual size)
[    45.154] (II) FBDEV(0): Not using default mode "960x720" (doublescan mode not supported)
[    45.154] (II) FBDEV(0): Not using default mode "1920x1440" (height too large for virtual size)
[    45.154] (II) FBDEV(0): Not using default mode "960x720" (doublescan mode not supported)
[    45.155] (II) FBDEV(0): Not using default mode "832x624" (width too large for virtual size)
[    45.155] (II) FBDEV(0): Not using default mode "416x312" (doublescan mode not supported)
[    45.155] (II) FBDEV(0): Not using default mode "1400x1050" (height too large for virtual size)
[    45.155] (II) FBDEV(0): Not using default mode "700x525" (doublescan mode not supported)
[    45.155] (II) FBDEV(0): Not using default mode "1400x1050" (height too large for virtual size)
[    45.155] (II) FBDEV(0): Not using default mode "700x525" (doublescan mode not supported)
[    45.155] (II) FBDEV(0): Not using default mode "1920x1440" (height too large for virtual size)
[    45.155] (II) FBDEV(0): Not using default mode "960x720" (doublescan mode not supported)
[    45.155] (II) FBDEV(0): Not using default mode "2048x1536" (height too large for virtual size)
[    45.155] (II) FBDEV(0): Not using default mode "1024x768" (doublescan mode not supported)
[    45.155] (II) FBDEV(0): Not using default mode "2048x1536" (height too large for virtual size)
[    45.155] (II) FBDEV(0): Not using default mode "1024x768" (doublescan mode not supported)
[    45.155] (II) FBDEV(0): Not using default mode "2048x1536" (height too large for virtual size)
[    45.155] (II) FBDEV(0): Not using default mode "1024x768" (doublescan mode not supported)
[    45.156] (II) FBDEV(0): Printing probed modes for output LCD
[    45.156] (II) FBDEV(0): Modeline "480x800"x0.0    0.00  480 480 480 480  800 800 800 800 -hsync -vsync -csync (0.0 kHz)
[    45.156] (II) FBDEV(0): Output LCD connected
[    45.156] (II) FBDEV(0): Using exact sizes for initial modes
[    45.156] (II) FBDEV(0): Output LCD using initial mode 480x800
[    45.156] (II) FBDEV(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    45.156] (II) Loading sub module "fb"
[    45.156] (II) LoadModule: "fb"
[    45.159] (II) Loading /usr/lib/xorg/modules/libfb.so
[    45.201] (II) Module fb: vendor="X.Org Foundation"
[    45.201]     compiled for 1.8.0, module version = 1.0.0
[    45.202]     ABI class: X.Org ANSI C Emulation, version 0.4
[    45.212] (++) FBDEV(0): DPI set to (120, 120)
[    45.212] (II) FBDEV(0): Pitch updated to 480 after ModeInit
[    45.213] (II) Loading sub module "exa"
[    45.213] (II) LoadModule: "exa"
[    45.215] (II) Loading /usr/lib/xorg/modules/libexa.so
[    45.216] (II) Module exa: vendor="X.Org Foundation"
[    45.216]     compiled for 1.8.0, module version = 2.5.0
[    45.216]     ABI class: X.Org Video Driver, version 7.0
[    45.217] (II) EXA(0): Driver allocated offscreen pixmaps
[    45.217] (II) EXA(0): Driver registered support for the following operations:
[    45.217] (II)         Solid
[    45.217] (II)         Copy
[    45.217] PowerVR device not found
[    45.217]
Fatal server error:
[    45.217] PVR2D_Init() failed
[    45.217]
[    45.217]
Please consult the The X.Org Foundation support
     at http://wiki.x.org
 for help.
[    45.217] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    45.218]