Friday, July 30, 2010

Read japanese books ('10 Jul)

I'll introduce japanese books have already been read in this month.

"道をひらく" 松下幸之助



"黄金の扉を開ける賢者の海外投資術" 橘玲


"涙の数だけ大きくなれる!" 木下晴弘


"プロフェッショナルマネジャー" ハロルド・ジェニーン


"マネーロンダリング入門" 橘玲

Saturday, July 24, 2010

Memo: dmesg and X.org.0.log on the MeeGo + Nexus One

MeeGo kernel was paniced on the N1. then I used android kernel was built by myself.
X.Org doesn't work yet.

dmesg
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.29-droid-debian (dbrowne@TheBria) (gcc version 4.4.0 (GCC) ) #11 PREEMPT Mon Feb 8 01:02:44 EST 2010
[    0.000000] CPU: ARMv7 Processor [510f00f2] revision 2 (ARMv7), cr=10c5387f
[    0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
[    0.000000] Machine: mahimahi
[    0.000000] Ignoring unrecognised tag 0x4d534d71
[    0.000000] Ignoring unrecognised tag 0x4d534d72
[    0.000000] Ignoring unrecognised tag 0x4d534d73
[    0.000000] Ignoring unrecognised tag 0x4d534d74
[    0.000000] Ignoring unrecognised tag 0x4d534d75
[    0.000000] Ignoring unrecognised tag 0x4d534d76
[    0.000000] Ignoring unrecognised tag 0x5441000a
[    0.000000] Ignoring unrecognised tag 0x41387898
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 56064
[    0.000000] free_area_init_node: node 0, pgdat c045fd90, node_mem_map c0510000
[    0.000000]   Normal zone: 438 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 55626 pages, LIFO batch:15
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 55626
[    0.000000] Kernel command line: board_mahimahi.disable_uart3=0 board_mahimahi.usb_h2w_sw=0 board_mahimahi.disable_sdcard=0 diag.enabled=0 board_mahimahi.debug_uart=0 smisize=0  androidboot.baseband=4.06.00.12_7 androidboot.cid=GOOGL001 androidboot.carrier=GOOGLE androidboot.mid=PB9910000 androidboot.keycaps=qwerty androidboot.mode=normal androidboot.serialno=HT015P803993 androidboot.bootloader=0.33.0012 init=/sbin/preinit rootwait root=/dev/mmcblk0p1 rootfstype=ext3 rw console=ttyS2,115200n8 omapfb.vram=0:2M,1:2M,2:2M nosplash
[    0.000000] Unknown boot option `board_mahimahi.disable_uart3=0': ignoring
[    0.000000] Unknown boot option `board_mahimahi.usb_h2w_sw=0': ignoring
[    0.000000] Unknown boot option `androidboot.baseband=4.06.00.12_7': ignoring
[    0.000000] Unknown boot option `androidboot.cid=GOOGL001': ignoring
[    0.000000] Unknown boot option `androidboot.carrier=GOOGLE': ignoring
[    0.000000] Unknown boot option `androidboot.mid=PB9910000': ignoring
[    0.000000] Unknown boot option `androidboot.keycaps=qwerty': ignoring
[    0.000000] Unknown boot option `androidboot.mode=normal': ignoring
[    0.000000] Unknown boot option `androidboot.bootloader=0.33.0012': ignoring
[    0.000000] Unknown boot option `omapfb.vram=0:2M,1:2M,2:2M': ignoring
[    0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[    0.000000] Console: colour dummy device 80x30
[    0.000183] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000488] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.012023] Memory: 219MB = 219MB total
[    0.012054] Memory: 216832KB available (4144K code, 884K data, 108K init)
[    0.012664] Calibrating delay loop... 509.54 BogoMIPS (lpj=2547712)
[    0.239898] Mount-cache hash table entries: 512
[    0.240814] Initializing cgroup subsys debug
[    0.240814] Initializing cgroup subsys cpuacct
[    0.240844] Initializing cgroup subsys freezer
[    0.240875] CPU: Testing write buffer coherency: ok
[    0.243469] net_namespace: 748 bytes
[    0.243988] regulator: core version 0.5
[    0.244323] NET: Registered protocol family 16
[    0.245666] mahimahi_init() revision=129
[    4.153503] mahimahi_init_mmc()+
[    4.153808] mahimahi_init_mmc()-
[    4.163177] bio: create slab at 0
[    4.164550] msm_i2c_probe
[    4.164672] msm_i2c_probe: clk_ctl 35d, 100000 Hz
[    4.166046] regulator: VDCDC1: 1000 <--> 1300 mV
[    4.166259] regulator: VDCDC2: 1260 mV
[    4.166442] regulator: VDCDC3: 800 <--> 3300 mV
[    4.166625] regulator: LDO1: 1000 <--> 3150 mV
[    4.166839] regulator: LDO2: 3300 mV
[    4.168823] Bluetooth: Core ver 2.15
[    4.169036] NET: Registered protocol family 31
[    4.169036] Bluetooth: HCI device and connection manager initialized
[    4.169067] Bluetooth: HCI socket layer initialized
[    4.169525] cfg80211: Using static regulatory domain info
[    4.169525] cfg80211: Regulatory domain: US
[    4.169555]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    4.169555]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[    4.169586]     (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    4.169586]     (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    4.169616]     (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    4.169616]     (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    4.169647]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[    4.169647] cfg80211: Calling CRDA for country: US
[    4.171081] Switched to high resolution mode on CPU 0
[    4.171478] NET: Registered protocol family 2
[    4.171722] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[    4.172302] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    4.172485] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[    4.172546] TCP: Hash tables configured (established 8192 bind 8192)
[    4.172576] TCP reno registered
[    4.172882] NET: Registered protocol family 1
[    4.173858] smd_init()
[    4.173858] smd_core_init()
[    4.173950] smd_core_init() done
[    4.173980] msm_init_last_radio_log: last radio log is 40000 bytes long
[    4.174468] smd_alloc_channel() cid=00 size=08192 'SMD_DS'
[    4.174652] smd_alloc_channel() cid=01 size=08192 'SMD_DIAG'
[    4.174804] smd_alloc_channel() cid=02 size=08192 'SMD_RPCCALL'
[    4.175018] smd_alloc_channel() cid=07 size=32768 'SMD_DATA1'
[    4.175170] smd_alloc_channel() cid=08 size=08192 'SMD_DATA2'
[    4.175323] smd_alloc_channel() cid=09 size=08192 'SMD_DATA3'
[    4.175476] smd_alloc_channel() cid=11 size=32768 'SMD_DATA5'
[    4.175628] smd_alloc_channel() cid=12 size=32768 'SMD_DATA6'
[    4.175781] smd_alloc_channel() cid=13 size=32768 'SMD_DATA7'
[    4.175933] smd_alloc_channel() cid=15 size=08192 'SMD_DATA9'
[    4.176086] smd_alloc_channel() cid=27 size=08192 'SMD_GPSNMEA'
[    4.176269] smd_alloc_channel() cid=40 size=08192 'DSP_DIAG'
[    4.176422] smd_alloc_channel() cid 41 does not exist
[    4.176452] smd_alloc_channel() cid=42 size=08192 'DSP_DAL_AQ_VID'
[    4.176605] smd_alloc_channel() cid=43 size=08192 'DSP_DAL_AQ_AUD'
[    4.176757] smd_alloc_channel() cid=46 size=08192 'DSP_DAL00'
[    4.176910] smd_alloc_channel() cid 47 does not exist
[    4.176940] smd_alloc_channel() cid=48 size=08192 'SMD_DAL_AM_AUD'
[    4.177093] smd_alloc_channel() cid=49 size=08192 'SMD_DAL00'
[    4.177246] smd_alloc_channel() cid=50 size=08192 'SMD_DATA5_CNTL'
[    4.177398] smd_alloc_channel() cid=51 size=08192 'SMD_DATA6_CNTL'
[    4.177612] smd_alloc_channel() cid=52 size=08192 'SMD_DATA7_CNTL'
[    4.178894] SMD: ch 2 1 -> 2
[    4.181884] mdp_probe: initialized
[    4.181945] spi: SPI_CONFIG=8f
[    4.181945] spi: SPI_IO_CONTROL=401
[    4.181945] spi: SPI_OPERATIONAL=85
[    4.181976] spi: SPI_ERROR_FLAGS_EN=7f
[    4.181976] spi: SPI_ERROR_FLAGS=7f
[    4.181976] -mahimahi_init_spi_hack()
[    4.182373] Registered led device: lcd-backlight
[    4.184783] mahimahi-microp 0-0066: microp version [0B][15]
[    4.185211] input: lightsensor-level as /devices/virtual/input/input0
[    4.185577] Registered led device: green
[    4.185791] Registered led device: amber
[    4.185974] Registered led device: red
[    4.186157] Registered led device: blue
[    4.186340] Registered led device: jogball-backlight
[    4.186523] Registered led device: button-backlight
[    4.187042] microp_function_initialize: als_kadc=0x4f, als_gadc=0xc0
[    4.202148] flashlight_init
[    4.202209] flashlight_probe
[    4.202239] flashlight_setup_gpio
[    4.202484] Registered led device: flashlight
[    4.203125] smd_alloc_channel() cid 41 does not exist
[    4.203155] smd_alloc_channel() cid 47 does not exist
[    4.204986] H2W: htc_35mm_jack driver register
[    4.205688] input: h2w headset as /devices/virtual/input/input1
[    4.214935] ashmem: initialized
[    4.216339] yaffs Feb  4 2010 00:08:24 Installing.
[    4.220458] alg: No test for stdrng (krng)
[    4.220550] io scheduler noop registered
[    4.220550] io scheduler anticipatory registered (default)
[    4.221405] +mddi_client_nt35399_init()
[    4.221893] samsung_oled_panel_init: +()
[    4.222167] samsung_oled_panel_init: -()
[    4.222900] msmfb_probe() installing 480 x 800 panel
[    4.223358] mdp_lcdc_probe: initialized
[    4.235992] msm_serial: detected port #0
[    4.236083] msm_serial.0: ttyMSM0 at MMIO 0xa9a00000 (irq = 64) is a MSM
[    4.236511] msm_serial: driver initialized
[    4.236846] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 44) is a MSM HS UART
[    4.237274] msm_serial_hs module loaded
[    4.241516] loop: module loaded
[    4.241607] pmem: 1 init
[    4.242553] pmem_adsp: 1 init
[    4.244384] pmem_camera: 1 init
[    4.245178] Android kernel panic handler initialized (bind=crashdata)
[    4.245208] PPP generic driver version 2.4.2
[    4.245605] PPP Deflate Compression module registered
[    4.245635] PPP BSD Compression module registered
[    4.246490] PPP MPPE Compression module registered
[    4.246520] NET: Registered protocol family 24
[    4.247192] tun: Universal TUN/TAP device driver, 1.6
[    4.247222] tun: (C) 1999-2004 Max Krasnyansky
[    4.247802] rmnet0 (): not using net_device_ops yet
[    4.248443] rmnet1 (): not using net_device_ops yet
[    4.248992] rmnet2 (): not using net_device_ops yet
[    4.249572] Linux video capture interface: v2.00
[    4.249694] msm_v4l2: msm_v4l2_init
[    4.250183] s5k3e2fx_sensor_probe
[    4.844787] allocated dma buffer at ffa01000, dma_addr 2d54e000
[    4.844879] read CFG0 = aa5400c0, CFG1 = 6746a
[    4.844909] CFG0 = e85408c0, CFG1 = 4745e
[    4.844909] CFG0: cw/page=3 ud_sz=516 ecc_sz=10 spare_sz=0 num_addr_cycles=5
[    4.845001] NAND_READ_ID = 5510bcad
[    4.845153] status: e03120
[    4.845153] nandid: 5510bcad maker ad device bc
[    4.845245] CFG0: cw/page=3 ud_sz=512 ecc_sz=10 spare_sz=4
[    4.845306] DEV_CMD1: f00f3000
[    4.845397] <6>NAND_EBI2_ECC_BUF_CFG: 1ff
[    4.845397] flash_id: 5510bcad size 20000000
[    4.845397] Creating 6 MTD partitions on "msm_nand":
[    4.845428] 0x000003ee0000-0x000003fc0000 : "misc"
[    4.847473] 0x000004240000-0x000004740000 : "recovery"
[    4.853546] 0x000004740000-0x0000049c0000 : "boot"
[    4.857025] 0x0000049c0000-0x00000dac0000 : "system"
[    5.009948] 0x00000dac0000-0x0000139c0000 : "cache"
[    5.110870] 0x0000139c0000-0x00001fe00000 : "userdata"
[    5.318939] usb_probe() io=ce06c000, irq=58, dma=ffa02000(2d56e000)
[    5.319641] usb_function_register() 'adb'
[    5.319854] usb_function_register() 'usb_mass_storage'
[    5.320007] usb_function_register() 'diag'
[    5.320007] msm_hsusb: functions bound. starting.
[    5.320007] usb_bind_func() 'usb_mass_storage'
[    5.320678] usb_mass_storage usb_mass_storage: Number of LUNs=1
[    5.320739] usb_bind_func() 'adb'
[    5.320739] adb_bind() cd4ee878, cd4eea38
[    5.321136] adb_bind() allocated 4 tx requests
[    5.321594] usb_bind_func() 'diag'
[    5.322082] SMD: ch 1 1 -> 2
[    5.322174] usb_ether_setup()
[    5.322235] usb0 (): not using net_device_ops yet
[    5.322814] usb_function_register() 'ether'
[    5.323547] hsusb: IDLE -> ONLINE
[    5.323638] hsusb: reset controller
[    5.323913] mahimahi_ts_power: power 1
[    5.361206] msm_hsusb_phy_reset: success
[    5.471710] msm_i2c msm_i2c.0: error, status 43c8
[    5.471740] msm_i2c msm_i2c.0: Error during data xfer (-5)
[    5.511199] ulpi: write 0x0c to 0x31
[    5.511199] ulpi: write 0x31 to 0x32
[    5.511199] ulpi: write 0x1d to 0x0d
[    5.511230] ulpi: write 0x1d to 0x10
[    5.511230] ept #0 out max:64 head:ffa02000 bit:0
[    5.511260] ept #1 out max:512 head:ffa02080 bit:1
[    5.511260] ept #2 out max:512 head:ffa02100 bit:2
[    5.511260] ept #3 out max:512 head:ffa02180 bit:3
[    5.511291] ept #0 in max:64 head:ffa02040 bit:16
[    5.511291] ept #1 in max:512 head:ffa020c0 bit:17
[    5.511322] ept #2 in max:512 head:ffa02140 bit:18
[    5.511322] ept #3 in max:512 head:ffa021c0 bit:19
[    5.511352] usb: notify offline
[    5.511383] diag_configure() 0
[    5.511383] msm_hsusb: enable pullup
[    5.511383] hsusb: ONLINE -> OFFLINE
[    5.511413] ### notify_usb_connected(0) ###
[    5.511444] diag_configure() 0
[    5.511444] msm_hsusb: disable pullup
[    5.551177] msm_hsusb_phy_reset: success
[    5.581848] synaptics_ts_probe: Product Major Version 1
[    5.582489] synaptics_ts_probe: Product Minor Version 3
[    5.583160] synaptics_ts_probe: product property 2
[    5.583831] synaptics_ts_probe: device control 81
[    5.584503] synaptics_ts_probe: interrupt enable 1
[    5.586395] synaptics_ts_probe: 0xe0: 1 1 1 2 1 3 0 0
[    5.587585] synaptics_ts_probe: Sensor properties 701
[    5.590728] synaptics_ts_probe: max_x 4050, max_y 6822
[    5.590728] synaptics_ts_probe: inactive_x -210 -168, inactive_y -127 -341
[    5.590759] synaptics_ts_probe: snap_x 0-0 0-0, snap_y 0-0 0-0
[    5.591094] input: synaptics-rmi-touchscreen as /devices/virtual/input/input2
[    5.591827] synaptics_ts_probe: Start touchscreen synaptics-rmi-touchscreen in interrupt mode
[    5.592651] GPIO Matrix Keypad Driver: Start keypad matrix for mahimahi-keypad... in interrupt mode
[    5.592773] GPIO Input Driver: Start gpio inputs for mahimahi-keypad... in interrupt mode
[    5.593383] input: mahimahi-keypad as /devices/virtual/input/input3
[    5.594024] input: mahimahi-nav as /devices/virtual/input/input4
[    5.594451] capella_cm3602_probe: probe
[    5.594451] capella_cm3602_probe: allocating input device
[    5.594512] capella_cm3602_probe: registering input device
[    5.594818] input: proximity as /devices/virtual/input/input5
[    5.595092] capella_cm3602_probe: registering misc device
[    5.595306] capella_cm3602_setup
[    5.595336] proximity 1
[    5.595886] using input dev h2w headset for key reset
[    5.595916] using input dev mahimahi-keypad for key reset
[    5.595947] using input dev mahimahi-nav for key reset
[    5.597015] using rtc device, msm_rtc, for alarms<6>rs30000048:00010000 rs30000048:00010000: rtc core: registered msm_rtc as rtc0
[    5.597137] AKM8973 compass driver: init
[    5.598602] input: compass as /devices/virtual/input/input6
[    5.599395] a1026_init
[    5.599731] Driver for 1-wire Dallas network protocol.
[    5.601135] msm_i2c msm_i2c.0: error, status 43c8
[    5.601165] msm_i2c msm_i2c.0: Error during data xfer (-5)
[    5.601196] ds2482 0-0018: i2c write c3 87 failed, -5, retries left 5
[    5.601531] msm_i2c msm_i2c.0: error, status 43c8
[    5.601562] msm_i2c msm_i2c.0: Error during data xfer (-5)
[    5.601623] ds2482 0-0018: i2c write c3 87 failed, -5, retries left 4
[    5.601959] msm_i2c msm_i2c.0: error, status 43c8
[    5.601989] msm_i2c msm_i2c.0: Error during data xfer (-5)
[    5.602020] ds2482 0-0018: i2c write c3 87 failed, -5, retries left 3
[    5.602355] msm_i2c msm_i2c.0: error, status 43c8
[    5.602386] msm_i2c msm_i2c.0: Error during data xfer (-5)
[    5.602416] ds2482 0-0018: i2c write c3 87 failed, -5, retries left 2
[    5.602783] msm_i2c msm_i2c.0: error, status 43c8
[    5.602783] msm_i2c msm_i2c.0: Error during data xfer (-5)
[    5.602844] ds2482 0-0018: i2c write c3 87 failed, -5, retries left 1
[    5.603149] msm_i2c msm_i2c.0: error, status 43c8
[    5.603179] msm_i2c msm_i2c.0: Error during data xfer (-5)
[    5.603240] ds2482 0-0018: i2c write c3 87 failed, -5, retries left 0
[    5.604705] device-mapper: uevent: version 1.0.3
[    5.605194] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    5.605285] Bluetooth: Virtual HCI driver ver 1.2
[    5.605499] Bluetooth: HCI UART driver ver 2.2
[    5.605529] Bluetooth: HCI H4 protocol initialized
[    5.605529] Bluetooth: HCILL protocol initialized
[    5.606872] mmc0: Qualcomm MSM SDCC at 0x00000000a0300000 irq 24,0 dma 8
[    5.606872] mmc0: 4 bit data mode enabled
[    5.606903] mmc0: MMC clock 144000 -> 50000000 Hz, PCLK 64000000 Hz
[    5.606903] mmc0: Slot eject status = 1
[    5.606903] mmc0: Power save feature enable = 1
[    5.606933] mmc0: DM non-cached buffer at ffa04000, dma_addr 0x2d59e000
[    5.606933] mmc0: DM cmd busaddr 0x2d59e000, cmdptr busaddr 0x2d59e300
[    5.607879] mmc1: Qualcomm MSM SDCC at 0x00000000a0400000 irq 26,0 dma 8
[    5.607879] mmc1: 4 bit data mode enabled
[    5.607910] mmc1: MMC clock 144000 -> 50000000 Hz, PCLK 64000000 Hz
[    5.607910] mmc1: Slot eject status = 0
[    5.607910] mmc1: Power save feature enable = 1
[    5.607940] mmc1: DM non-cached buffer at ffa05000, dma_addr 0x2d5a0000
[    5.607940] mmc1: DM cmd busaddr 0x2d5a0000, cmdptr busaddr 0x2d5a0300
[    5.609619] logger: created 64K log 'log_main'
[    5.609863] logger: created 256K log 'log_events'
[    5.610076] logger: created 64K log 'log_radio'
[    5.610168] ram_console: got buffer at 3a00000, size 40000
[    5.610290] ram_console: found existing buffer, size 19559, start 19559
[    5.697082] console [ram-1] enabled
[    5.750823] Netfilter messages via NETLINK v0.30.
[    5.751129] nf_conntrack version 0.5.0 (3504 buckets, 14016 max)
[    5.751556] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[    5.751831] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[    5.751983] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[    5.752532] xt_time: kernel timezone is -0000
[    5.752960] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.753387] ClusterIP Version 0.8 loaded successfully
[    5.753662] arp_tables: (C) 2002 David S. Miller
[    5.753875] TCP cubic registered
[    5.754119] Initializing XFRM netlink socket
[    5.754302] NET: Registered protocol family 17
[    5.754577] NET: Registered protocol family 15
[    5.754821] Bridge firewalling registered
[    5.755004] Bluetooth: L2CAP ver 2.13
[    5.755279] Bluetooth: L2CAP socket layer initialized
[    5.755432] Bluetooth: SCO (Voice Link) ver 0.6
[    5.755554] Bluetooth: SCO socket layer initialized
[    5.756561] Bluetooth: RFCOMM socket layer initialized
[    5.756774] Bluetooth: RFCOMM TTY layer initialized
[    5.757049] Bluetooth: RFCOMM ver 1.11
[    5.757202] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.757446] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    5.757781] lib80211: common routines for IEEE802.11 drivers
[    5.758026] lib80211_crypt: registered algorithm 'NULL'
[    5.758178] ThumbEE CPU extension supported.
[    5.758819] clock_late_init() disabled 19 unused clocks
[    5.759216] mahimahi_wifi_init: start
[    5.769042] VFP support v0.3: implementor 51 architecture 0 part 0f variant 0 rev 1
[    5.774993] rs30000048:00010000 rs30000048:00010000: setting system clock to 2010-07-24 15:30:33 UTC (1279985433)
[    5.775451] Waiting for root device /dev/mmcblk0p1...
[    5.816619] mmc1: Command timeout
[    5.822601] mmc1: Command timeout
[    5.828674] mmc1: Command timeout
[    5.834655] mmc1: Command timeout
[    6.100616] mmc1: host does not support reading read-only switch. assuming write-enable.
[    6.100891] mmc1: new high speed SDHC card at address aaaa
[    6.101745] mmcblk0: mmc1:aaaa SU04G 3.69 GiB
[    6.102264]  mmcblk0: p1 p2
[    6.216491] kjournald starting.  Commit interval 5 seconds
[    6.221374] EXT3 FS on mmcblk0p1, internal journal
[    6.221679] EXT3-fs: mounted filesystem with ordered data mode.
[    6.222045] VFS: Mounted root (ext3 filesystem) on device 179:1.
[    6.222412] Freeing init memory: 108K
[    6.227233] Warning: unable to open an initial console.
[    6.229248] Failed to execute /sbin/preinit.  Attempting defaults...
[    6.232116] batt: 100%, 4153 mV, 94 mA (-5 avg), 34.7 C, 1384 mAh
[    6.232513] batt: charging OFF


X.org.0.log
[    44.954]
X.Org X Server 1.8.0
Release Date: 2010-04-02
[    44.954] X Protocol Version 11, Revision 0
[    44.954] Build Operating System: Linux 2.6.27.45-0.1-pae armv5tel
[    44.954] Current Operating System: Linux localhost.localdomain 2.6.29-droid-debian #11 PREEMPT Mon Feb 8 01:02:44 EST 2010 armv7l
[    44.954] Kernel command line: board_mahimahi.disable_uart3=0 board_mahimahi.usb_h2w_sw=0 board_mahimahi.disable_sdcard=0 diag.enabled=0 board_mahimahi.debug_uart=0 smisize=0  androidboot.baseband=4.06.00.12_7 androidboot.cid=GOOGL001 androidboot.carrier=GOOGLE androidboot.mid=PB9910000 androidboot.keycaps=qwerty androidboot.mode=normal androidboot.serialno=HT015P803993 androidboot.bootloader=0.33.0012 init=/sbin/preinit rootwait root=/dev/mmcblk0p1 rootfstype=ext3 rw console=ttyS2,115200n8 omapfb.vram=0:2M,1:2M,2:2M nosplash
[    44.955] Build Date: 02 July 2010  05:59:41PM
[    44.955] Build ID: xorg-x11-server 1.8.0-5.23
[    44.955] Current version of pixman: 0.17.4
[    44.955]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    44.955] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    44.956] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 24 07:36:45 2010
[    44.958] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    44.959] (==) No Layout section.  Using the first Screen section.
[    44.959] (==) No screen section available. Using defaults.
[    44.959] (**) |-->Screen "Default Screen Section" (0)
[    44.959] (**) |   |-->Monitor ""
[    45.010] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    45.011] (**) Option "AllowEmptyInput" "False"
[    45.011] (==) Automatically adding devices
[    45.011] (==) Automatically enabling devices
[    45.011] (==) FontPath set to:
    catalogue:/etc/X11/fontpath.d,
    built-ins
[    45.011] (==) ModulePath set to "/usr/lib/xorg/modules"
[    45.011] (==) |-->Input Device ""
[    45.011] (==) |-->Input Device ""
[    45.011] (==) No Layout section. Using the default mouse configuration.
[    45.011] (==) No Layout section. Using the default keyboard configuration.
[    45.011] (II) Loader magic: 0x193178
[    45.011] (II) Module ABI versions:
[    45.011]     X.Org ANSI C Emulation: 0.4
[    45.012]     X.Org Video Driver: 7.0
[    45.012]     X.Org XInput driver : 9.0
[    45.012]     X.Org Server Extension : 3.0
[    45.012] (II) LoadModule: "extmod"
[    45.014] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    45.015] (II) Module extmod: vendor="X.Org Foundation"
[    45.015]     compiled for 1.8.0, module version = 1.0.0
[    45.015]     Module class: X.Org Server Extension
[    45.015]     ABI class: X.Org Server Extension, version 3.0
[    45.015] (II) Loading extension MIT-SCREEN-SAVER
[    45.015] (II) Loading extension XFree86-VidModeExtension
[    45.015] (II) Loading extension XFree86-DGA
[    45.015] (II) Loading extension DPMS
[    45.015] (II) Loading extension XVideo
[    45.015] (II) Loading extension XVideo-MotionCompensation
[    45.015] (II) Loading extension X-Resource
[    45.016] (II) LoadModule: "dbe"
[    45.016] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    45.017] (II) Module dbe: vendor="X.Org Foundation"
[    45.017]     compiled for 1.8.0, module version = 1.0.0
[    45.017]     Module class: X.Org Server Extension
[    45.017]     ABI class: X.Org Server Extension, version 3.0
[    45.017] (II) Loading extension DOUBLE-BUFFER
[    45.017] (II) LoadModule: "glx"
[    45.018] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    45.019] (II) Module glx: vendor="X.Org Foundation"
[    45.019]     compiled for 1.8.0, module version = 1.0.0
[    45.019]     ABI class: X.Org Server Extension, version 3.0
[    45.040] (==) AIGLX enabled
[    45.040] (II) Loading extension GLX
[    45.040] (II) LoadModule: "dri"
[    45.041] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    45.043] (II) Module dri: vendor="X.Org Foundation"
[    45.043]     compiled for 1.8.0, module version = 1.0.0
[    45.043]     ABI class: X.Org Server Extension, version 3.0
[    45.043] (II) Loading extension XFree86-DRI
[    45.043] (II) LoadModule: "dri2"
[    45.044] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    45.045] (II) Module dri2: vendor="X.Org Foundation"
[    45.045]     compiled for 1.8.0, module version = 1.2.0
[    45.045]     ABI class: X.Org Server Extension, version 3.0
[    45.045] (II) Loading extension DRI2
[    45.045] Primary device is not PCI
[    45.045] (==) Matched fbdev as autoconfigured driver 0
[    45.045] (==) Assigned the driver to the xf86ConfigLayout
[    45.045] (II) LoadModule: "fbdev"
[    45.048] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    45.073] (II) Module fbdev: vendor="X.Org Foundation"
[    45.073]     compiled for 1.8.0, module version = 0.4.0
[    45.073]     ABI class: X.Org Video Driver, version 7.0
[    45.073] (II) LoadModule: "mouse"
[    45.076] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[    45.077] (II) Module mouse: vendor="X.Org Foundation"
[    45.077]     compiled for 1.8.0, module version = 1.5.0
[    45.077]     Module class: X.Org XInput Driver
[    45.077]     ABI class: X.Org XInput driver, version 9.0
[    45.077] (II) LoadModule: "kbd"
[    45.120] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[    45.121] (II) Module kbd: vendor="X.Org Foundation"
[    45.121]     compiled for 1.8.0, module version = 1.4.0
[    45.121]     Module class: X.Org XInput Driver
[    45.121]     ABI class: X.Org XInput driver, version 9.0
[    45.121] (II) FBDEV: driver for framebuffer: fbdev
[    45.121] (++) using VT number 2

[    45.122] (WW) xf86OpenConsole: Could not save ownership of VT
[    45.122] (WW) xf86OpenConsole: chown /dev/tty0 failed: No such file or directory
[    45.125] (WW) Falling back to old probe method for fbdev
[    45.125] (II) Loading sub module "fbdevhw"
[    45.125] (II) LoadModule: "fbdevhw"
[    45.126] (II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
[    45.126] (II) Module fbdevhw: vendor="X.Org Foundation"
[    45.126]     compiled for 1.8.0, module version = 0.0.2
[    45.126]     ABI class: X.Org Video Driver, version 7.0
[    45.127] (II) FBDEV(0): using default device
[    45.127] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    45.127] (II) Running in FRAMEBUFFER Mode
[    45.127] (II) FBDEV(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 16/16
[    45.127] (==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
[    45.127] (==) FBDEV(0): RGB weight 565
[    45.128] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[    45.128] (==) FBDEV(0): Default visual is TrueColor
[    45.128] (II) FBDEV(0): hardware: msmfb (video memory: 4500kB)
[    45.128] (II) FBDEV(0): Output LCD has no monitor section
[    45.129] (II) FBDEV(0): Not using default mode "640x350" (vrefresh out of range)
[    45.129] (II) FBDEV(0): Not using default mode "320x175" (doublescan mode not supported)
[    45.129] (II) FBDEV(0): Not using default mode "640x400" (vrefresh out of range)
[    45.129] (II) FBDEV(0): Not using default mode "320x200" (doublescan mode not supported)
[    45.129] (II) FBDEV(0): Not using default mode "720x400" (vrefresh out of range)
[    45.129] (II) FBDEV(0): Not using default mode "360x200" (doublescan mode not supported)
[    45.129] (II) FBDEV(0): Not using default mode "640x480" (vrefresh out of range)
[    45.129] (II) FBDEV(0): Not using default mode "320x240" (doublescan mode not supported)
[    45.129] (II) FBDEV(0): Not using default mode "640x480" (vrefresh out of range)
[    45.129] (II) FBDEV(0): Not using default mode "320x240" (doublescan mode not supported)
[    45.150] (II) FBDEV(0): Not using default mode "640x480" (vrefresh out of range)
[    45.150] (II) FBDEV(0): Not using default mode "320x240" (doublescan mode not supported)
[    45.150] (II) FBDEV(0): Not using default mode "640x480" (vrefresh out of range)
[    45.151] (II) FBDEV(0): Not using default mode "320x240" (doublescan mode not supported)
[    45.151] (II) FBDEV(0): Not using default mode "800x600" (vrefresh out of range)
[    45.151] (II) FBDEV(0): Not using default mode "400x300" (doublescan mode not supported)
[    45.151] (II) FBDEV(0): Not using default mode "800x600" (vrefresh out of range)
[    45.151] (II) FBDEV(0): Not using default mode "400x300" (doublescan mode not supported)
[    45.151] (II) FBDEV(0): Not using default mode "800x600" (vrefresh out of range)
[    45.151] (II) FBDEV(0): Not using default mode "400x300" (doublescan mode not supported)
[    45.151] (II) FBDEV(0): Not using default mode "800x600" (vrefresh out of range)
[    45.151] (II) FBDEV(0): Not using default mode "400x300" (doublescan mode not supported)
[    45.151] (II) FBDEV(0): Not using default mode "800x600" (vrefresh out of range)
[    45.151] (II) FBDEV(0): Not using default mode "400x300" (doublescan mode not supported)
[    45.151] (II) FBDEV(0): Not using default mode "1024x768i" (interlace mode not supported)
[    45.151] (II) FBDEV(0): Not using default mode "512x384i" (doublescan mode not supported)
[    45.152] (II) FBDEV(0): Not using default mode "1024x768" (width too large for virtual size)
[    45.152] (II) FBDEV(0): Not using default mode "512x384" (doublescan mode not supported)
[    45.152] (II) FBDEV(0): Not using default mode "1024x768" (width too large for virtual size)
[    45.152] (II) FBDEV(0): Not using default mode "512x384" (doublescan mode not supported)
[    45.152] (II) FBDEV(0): Not using default mode "1024x768" (width too large for virtual size)
[    45.152] (II) FBDEV(0): Not using default mode "512x384" (doublescan mode not supported)
[    45.152] (II) FBDEV(0): Not using default mode "1024x768" (width too large for virtual size)
[    45.152] (II) FBDEV(0): Not using default mode "512x384" (doublescan mode not supported)
[    45.152] (II) FBDEV(0): Not using default mode "1152x864" (height too large for virtual size)
[    45.152] (II) FBDEV(0): Not using default mode "576x432" (doublescan mode not supported)
[    45.152] (II) FBDEV(0): Not using default mode "1280x960" (height too large for virtual size)
[    45.152] (II) FBDEV(0): Not using default mode "640x480" (doublescan mode not supported)
[    45.152] (II) FBDEV(0): Not using default mode "1280x960" (height too large for virtual size)
[    45.152] (II) FBDEV(0): Not using default mode "640x480" (doublescan mode not supported)
[    45.153] (II) FBDEV(0): Not using default mode "1280x1024" (height too large for virtual size)
[    45.153] (II) FBDEV(0): Not using default mode "640x512" (doublescan mode not supported)
[    45.153] (II) FBDEV(0): Not using default mode "1280x1024" (height too large for virtual size)
[    45.153] (II) FBDEV(0): Not using default mode "640x512" (doublescan mode not supported)
[    45.153] (II) FBDEV(0): Not using default mode "1280x1024" (height too large for virtual size)
[    45.153] (II) FBDEV(0): Not using default mode "640x512" (doublescan mode not supported)
[    45.153] (II) FBDEV(0): Not using default mode "1600x1200" (height too large for virtual size)
[    45.153] (II) FBDEV(0): Not using default mode "800x600" (doublescan mode not supported)
[    45.153] (II) FBDEV(0): Not using default mode "1600x1200" (height too large for virtual size)
[    45.153] (II) FBDEV(0): Not using default mode "800x600" (doublescan mode not supported)
[    45.153] (II) FBDEV(0): Not using default mode "1600x1200" (height too large for virtual size)
[    45.153] (II) FBDEV(0): Not using default mode "800x600" (doublescan mode not supported)
[    45.153] (II) FBDEV(0): Not using default mode "1600x1200" (height too large for virtual size)
[    45.153] (II) FBDEV(0): Not using default mode "800x600" (doublescan mode not supported)
[    45.154] (II) FBDEV(0): Not using default mode "1600x1200" (height too large for virtual size)
[    45.154] (II) FBDEV(0): Not using default mode "800x600" (doublescan mode not supported)
[    45.154] (II) FBDEV(0): Not using default mode "1792x1344" (height too large for virtual size)
[    45.154] (II) FBDEV(0): Not using default mode "896x672" (doublescan mode not supported)
[    45.154] (II) FBDEV(0): Not using default mode "1792x1344" (height too large for virtual size)
[    45.154] (II) FBDEV(0): Not using default mode "896x672" (doublescan mode not supported)
[    45.154] (II) FBDEV(0): Not using default mode "1856x1392" (height too large for virtual size)
[    45.154] (II) FBDEV(0): Not using default mode "928x696" (doublescan mode not supported)
[    45.154] (II) FBDEV(0): Not using default mode "1856x1392" (height too large for virtual size)
[    45.154] (II) FBDEV(0): Not using default mode "928x696" (doublescan mode not supported)
[    45.154] (II) FBDEV(0): Not using default mode "1920x1440" (height too large for virtual size)
[    45.154] (II) FBDEV(0): Not using default mode "960x720" (doublescan mode not supported)
[    45.154] (II) FBDEV(0): Not using default mode "1920x1440" (height too large for virtual size)
[    45.154] (II) FBDEV(0): Not using default mode "960x720" (doublescan mode not supported)
[    45.155] (II) FBDEV(0): Not using default mode "832x624" (width too large for virtual size)
[    45.155] (II) FBDEV(0): Not using default mode "416x312" (doublescan mode not supported)
[    45.155] (II) FBDEV(0): Not using default mode "1400x1050" (height too large for virtual size)
[    45.155] (II) FBDEV(0): Not using default mode "700x525" (doublescan mode not supported)
[    45.155] (II) FBDEV(0): Not using default mode "1400x1050" (height too large for virtual size)
[    45.155] (II) FBDEV(0): Not using default mode "700x525" (doublescan mode not supported)
[    45.155] (II) FBDEV(0): Not using default mode "1920x1440" (height too large for virtual size)
[    45.155] (II) FBDEV(0): Not using default mode "960x720" (doublescan mode not supported)
[    45.155] (II) FBDEV(0): Not using default mode "2048x1536" (height too large for virtual size)
[    45.155] (II) FBDEV(0): Not using default mode "1024x768" (doublescan mode not supported)
[    45.155] (II) FBDEV(0): Not using default mode "2048x1536" (height too large for virtual size)
[    45.155] (II) FBDEV(0): Not using default mode "1024x768" (doublescan mode not supported)
[    45.155] (II) FBDEV(0): Not using default mode "2048x1536" (height too large for virtual size)
[    45.155] (II) FBDEV(0): Not using default mode "1024x768" (doublescan mode not supported)
[    45.156] (II) FBDEV(0): Printing probed modes for output LCD
[    45.156] (II) FBDEV(0): Modeline "480x800"x0.0    0.00  480 480 480 480  800 800 800 800 -hsync -vsync -csync (0.0 kHz)
[    45.156] (II) FBDEV(0): Output LCD connected
[    45.156] (II) FBDEV(0): Using exact sizes for initial modes
[    45.156] (II) FBDEV(0): Output LCD using initial mode 480x800
[    45.156] (II) FBDEV(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    45.156] (II) Loading sub module "fb"
[    45.156] (II) LoadModule: "fb"
[    45.159] (II) Loading /usr/lib/xorg/modules/libfb.so
[    45.201] (II) Module fb: vendor="X.Org Foundation"
[    45.201]     compiled for 1.8.0, module version = 1.0.0
[    45.202]     ABI class: X.Org ANSI C Emulation, version 0.4
[    45.212] (++) FBDEV(0): DPI set to (120, 120)
[    45.212] (II) FBDEV(0): Pitch updated to 480 after ModeInit
[    45.213] (II) Loading sub module "exa"
[    45.213] (II) LoadModule: "exa"
[    45.215] (II) Loading /usr/lib/xorg/modules/libexa.so
[    45.216] (II) Module exa: vendor="X.Org Foundation"
[    45.216]     compiled for 1.8.0, module version = 2.5.0
[    45.216]     ABI class: X.Org Video Driver, version 7.0
[    45.217] (II) EXA(0): Driver allocated offscreen pixmaps
[    45.217] (II) EXA(0): Driver registered support for the following operations:
[    45.217] (II)         Solid
[    45.217] (II)         Copy
[    45.217] PowerVR device not found
[    45.217]
Fatal server error:
[    45.217] PVR2D_Init() failed
[    45.217]
[    45.217]
Please consult the The X.Org Foundation support
     at http://wiki.x.org
 for help.
[    45.217] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    45.218]

Thursday, July 1, 2010

My CFP has been accepted LinuxCon Japan

Yesteaday, LInuxCon Japan was published session schedule by The Linux Foundation

http://events.linuxfoundation.org/events/linuxcon-japan/schedule

Actually, I posted CFP(Call For Partitipation). Making a presentation in English, That's one of the my goal. I got a chance:)
My session is "Porting MeeGo to another devices". MeeGo is supported Netbooks, Nokia N900 smartphone now. MeeGo is released arm and x86 binaries. This is an opportunity that can use and support many devices. I'm sure we can do it. Also I have already ported ubuntu lucid to Nexus One.MeeGo probably work well.